Silicone High Temperature Resistant Topcoat

描述

Product selling point
High temperature resistant topcoat composed of silicone, high temperature resistant aluminum powder, filler, additives and organic solvent. 

Physical parameters

construction technology

1. Before coating, the dust, oil, welding slag, rust and old paint film on the object surface must be cleaned. The steel surface shall be shot and shot to Sa 2.5, and the local repair surface must be polished to St3. No water is allowed during the construction.

2, the single component of the material can be stirred evenly and construction. Two-component coating ratio is, group A: Group B component =14.2kg (large barrel): 4.3kg (small bucket).

The matching method of two-component construction is: fully open the large mouth of group A, add group B to the component A group, and fully stir evenly. Painting can be applied.

3, the paint is too thick, available special dilution dilution. Unused materials should be sealed and preserved.

4. On rainy days or when the relative humidity is greater than 75%, the construction should be stopped.

 Packaging and storage

1, the storage environment should be dry, cool, well ventilated, avoid high temperature, away from the fire source.

2. Packaging containers must be kept closed.
3. The effective storage period is 12 months.

matters need attention

• If the lid cannot be used up once, the lid should be sealed in time to prevent volatilization of the solvent.

 Health and Safety

• Please note the warning signs on the packaging container.
• Use it in a well-ventilated environment.
• Do not inhale the paint mist and avoid skin contact.
• Spray paint on the skin immediately with a suitable cleaning agent, soap and water.
• Splash into the eyes to flush with water, and seek immediate medical treatment.