Road striping paint
A single component self-drying coating composed of acrylic resin, pigment filler and imported auxiliaries.
描述
Product selling point
A single component self-drying coating composed of acrylic resin, pigment filler and imported auxiliaries.
Product selling point
| qualification | ||
| test item | unit | metric |
| The appearance of the paint film | The coating was normal in appearance | |
| Status in the container | — | After stirring and mixing, there is no hard block, appearing in a uniform state |
| Dry the table to dry | min | ≤1 |
| Time to work hard | h | ≤24 |
| Moh’s hardness | ≥8 | |
| flexibility | mm | ≤0.03 |
| cohesional strength | S | ≥60 |
| Adhesion (grid) | level | 2 |
| resistance to water | 24h | No bubble, no fall off |
key property
Paint film drying fast, short construction period;
Film is hairless edge, beautiful and generous;
Good weather resistance, not easy to yellowing;
Strong covering force, less amount of paint per unit area;
Hard paint film, good wear resistance and high adhesion;
construction technology
| 1. Theoretical dosage: 0.13-0.17kg / m. Lane (30um) |
| 2. Recommended coating: 1 gas spraying, conventional spraying, roll coating, brushing 2 (it is recommended to paint an epoxy primer on concrete |
| 3. Recoating interval time: the best interval is 1 hour |
| 4. Construction conditions: the construction base surface must be clean, dry, without loose layer, oil pollution and other dirt |
| 5. Construction environment: the substrate temperature is 3℃ higher than the dew point, the construction temperature is 5~40℃, the relative humidity is 80%, and it is not suitable for construction in rain and snow days |
Packaging and storage
Products should be stored in a cool, dry and ventilated place with a storage period of one year.
matters need attention
The actual amount of paint used in the coating depends on the roughness of the coated surface, the thickness of the paint film and the different coating loss.
- Paint site staff should wear good protective equipment, carefully check whether there is a danger of fire and explosion, maintain good ventilation, do not breathe paint fog,
Avoid skin contact, paint splash on the skin to immediately with the appropriate detergent, soap and water rinse, splash to the eyes to rinse with water, and medication treatment.
- This specification is the accumulation of our test and experience, and can be used as construction guidance. With the improvement of the product, the relevant data may be changed, subject to the latest instruction manual without notice.
