High chlorinated polyethylene topcoat
Hyperchlorinated polyethylene anticorrosive paint is composed of hyperchlorinated polyZ ene resin, modified resin, pigment, additives, solvent, etc.
描述
Product selling point
Hyperchlorinated polyethylene anticorrosive paint is composed of hyperchlorinated polyZ ene resin, modified resin, pigment, additives, solvent, etc.
Physical parameters
| qualification | ||
| test item | unit | metric |
| The appearance of the paint film | The coating was normal in appearance | |
| Status in the container | After stirring and mixing, there is no hard block, appearing in a uniform state | |
| Table dry | h | ≤0.5 |
| get right on the job | h | ≤12 |
| Viscosity (coated-4) | S | 70 |
| resistance to shock | Kg-cm | 50kg-cm |
| adhesion | level | 2 |
| thickness of dry film | mm | 30-35mm |
| Theoretical dosage | m | 90/m² |
| flash point | ℃ | 38℃ |
| Acid resistant 10d | d | No foaming, no rust |
| Alkaline resistant 10d | d | No foaming, no rust |
| Water resistance 10d | d | No foaming, no rust |
| Re-coating interval | h | Minimum of 6h (25℃) |
| Maximum 7d | ||
Performance characteristics
Water steam and oxygen to the paint film of low permeability, with excellent water resistance and corrosion resistance;
Fast drying, with good weather resistance, odor resistance and durability; compared with chlorine rubber corrosion coating has good heat resistance;
With excellent low temperature construction performance, can be constructed in-10-50℃ environment;
The paint film has good adhesion to steel, with excellent adhesion;
In this kind of coating old paint film when re-coating, do not have to get rid of the old paint film, maintenance is convenient;
job practice
| Surface treatment: the surface of primer or intermediate paint should be clean and dry. If the longest interval between primer or intermediate paint is exceeded, the front paint film with sandpaper is an effective means to increase the adhesion between layers. |
| Mix ratio: single component, open the package can be used. |
| Limit: prevent the water from seeping into the packaging bucket. |
| Painting method: brushing, air spraying, high pressure airless spraying; roller coating, brushing coating. |
Packaging and storage
1, the storage environment should be dry, cool, well ventilated, avoid high temperature, away from the fire source.
- Packaging containers must be kept closed.
- The effective storage period is 12 months.
matters need attention
- If the lid cannot be used up once, the lid should be sealed in time to prevent volatilization of the solvent.
Health and Safety
- Please note the warning signs on the packaging container.
- Use it in a well-ventilated environment.
- Do not inhale the paint mist and avoid skin contact.
- Spray paint on the skin immediately with a suitable cleaning agent, soap and water.
- Splash into the eyes to flush with water, and seek immediate medical treatment.