Epoxy zinc-rich primer
Two-component zinc-rich primer composed of epoxy resin, zinc powder, polyamide curing agent, additives and solvent.
描述
Product selling point
Two-component zinc-rich primer composed of epoxy resin, zinc powder, polyamide curing agent, additives and solvent.
Physical parameters
| qualification | ||
| test item | unit | metric |
| The appearance of the paint film | The coating was normal in appearance | |
| Status in the container | After stirring and mixing, there is no hard block, appearing in a uniform state | |
| lustre | dark | |
| pigment | —— | Zinc gray |
| Table dry | h | ≤4 |
| get right on the job | h | ≤24 |
| flash point | ℃ | ≥25℃ |
| solid content | 80% | |
| Theoretical dosage | —— | 250g/m² |
| Recoating interval time substrate temperature | 5℃ 25℃ 40℃ | |
| The shortest | 48h 24h 16h | |
| longest | no limit | |
key property
It has the cathodic protection effect and has the excellent rust prevention performance
It has excellent wear resistance
Heat resistance prominent when welding cutting less burning surface does not affect the welding performance
With excellent adhesion and impact resistance
It has good oil resistance and solvent resistance
Can match with most high performance rust paint and top paint
Construction conditions
The substrate temperature shall not be less than 5℃, and at least 3℃ higher than the air dew point temperature (the temperature and relative humidity shall be measured near the substrate), and the relative humidity shall not be greater than 65%. Good ventilation is usually required to ensure particularly normal drying.
job practice
Spraying: no less spraying or gas spraying. High pressure gas spraying is recommended. Pay attention to adjust the coating viscosity and air pressure when using air spraying. Diluent should not exceed 10%, otherwise affect the coating performance.
Brush coating: it is recommended to use in precoating and small area coating, but the specified dry film thickness must be achieved.
Packaging and storage
| 1, the storage environment should be dry, cool, well ventilated, avoid high temperature, away from the fire source. |
| 2. Packaging containers must be kept closed. |
| 3. The effective storage period is 12 months. |
matters need attention
- Avoid heat before the coating (at least 24 hours at 20℃).
- Zinc-rich primer surface can form zinc salt (also known as white rust), which should not be exposed for a long time before coating the rear paint.
- On the surface with zinc salt, secondary rust removal should be performed and all debris should be removed.
Health and Safety
- Please note the warning signs on the packaging container.
- Use it in a well-ventilated environment.
- Do not inhale the paint mist and avoid skin contact.
- Wash the paint splashed on the skin immediately with a suitable detergent, soap, and water.
- Splash into the eyes to flush with water, and seek immediate medical treatment.
