Epoxy floor topcoat

描述

Epoxy thin-coat floor topcoat
　　Product introduction:
　　A two-component floor topcoat composed of epoxy resin, pigments, additives, solvents, and curing agents.
　　Physical parameters:

　　Application areas:
　　Suitable for areas with high mechanical performance requirements, such as cement or terrazzo floors in machinery factories, hardware factories, docks, driveways, garages, industrial plants, automobile and aircraft repair shops, etc. that require strong wear resistance and certain impact resistance.
　　Main features:
　　• Pressure resistance, impact resistance
　　• General chemical corrosion resistance
　　• Seamless dustproof, easy to clean
　　• Optional colors, beautiful and bright
　　• Good wear resistance, long service life
　　Construction requirements:
　　1. The paint should be dry before surface treatment And remove all oil dirt and debris.
　　2. It is not suitable for construction when the substrate temperature is lower than 0℃; the substrate temperature must be 3℃ higher than the dew point, the ambient temperature should not be lower than 85%, and the temperature should not be higher than 5℃.
　　3. Coating method: airless spray/air spray, brush/roller coating, special thinner, dilution amount 0.-%/0-10%/0-3% (based on paint weight), nozzle diameter 0.4- 0.5mm/2.0-2.5mm, spraying pressure 12-15/0.3-0.4Mpa (about 3-6kg/cm)
　　4. Special diluent for cleaning agent
　　5. The number of coating passes is recommended to be 2-3, and the dry film thickness is not low at 100 microns.
　　Packaging and storage:
　　The product should be stored tightly in a cool, dry and ventilated place. The storage period is one year.
　　20: 4kg/set
　　Notes:
　　1. The actual amount of paint used during painting is 10%-50% higher than the theoretical amount depending on the roughness of the surface to be painted, the thickness of the paint film, and the painting loss.
　　2. Workers at the painting site should wear protective equipment, carefully check whether there is any risk of fire or explosion, maintain good ventilation, do not breathe paint mist, and avoid skin contact. If paint splashes on the skin, use appropriate detergent, soap and Rinse with water. If it splashes in the eyes, rinse with water and treat with medication.
　　3. This instruction manual is the accumulation of our tests and experience and can be used as a construction guide. As the product improves, the relevant data may be changed. The latest instruction manual of our company shall prevail without prior notice.