concrete polish

描述

Polishing agent
　　Product introduction:
　　The polishing agent is made of special polymer materials. The machine is durable and can resist wear, scratches and scratches. It has a wide range of uses and can be used for surface polishing based on cement products, marble, terrazzo, wear-resistant orthopedics, etc. . It can penetrate into the floor and bond with the concrete during the drying process. After drying and being physically polished, it can give the floor a super bright luster and improve the surface’s waterproof, dustproof, anti-fouling cleaning and anti-wear properties.
　　Application areas:
　　This product is suitable for emery wear-resistant floors, cement hardened floors (sealed and cured), terrazzo floors, and can also increase the surface gloss of various floor tiles, marbles, etc.
　　Main features:
　　1. The film formed by the brightener can effectively prevent the penetration of acids, alkali, solvents, gasoline and other pollutants, making the surface easy to wash and clean; 2. The brightener is
　　different from wax water in that it is firmly bonded to the concrete surface. The film layer formed penetrates into the gaps in the material and can seal it for a long time;
　　3. It has high anti-fouling and dust-proof effect and excellent water resistance;
　　4. It can improve the brightness of the surface, reduce the surface resistance and improve the durability. Abrasive.
　　Construction requirements:
　　1. Use a mop, scraper, soft brush or roller to apply the paint evenly, and wait for the brightener to be absorbed by the ground (about half an hour); 2.
　　Then wipe the surface with a soft object or polish it with a polishing machine (use white wool Fiber pad) until the brightness is reflected;
　　3. After polishing is completed, it can be used;
　　4. When the temperature is low, the interval needs to be extended appropriately.
　　Packaging and storage:
　　The product should be stored tightly in a cool, dry and ventilated place. The storage period is one year.
　　Paint film performance:

　　Note:
　　The actual amount of paint used during painting is 10%-50% higher than the theoretical amount depending on the roughness of the surface to be painted, the thickness of the paint film, and the painting loss.
　　Workers at the painting site should wear protective equipment, carefully check for fire and explosion hazards, maintain good ventilation, do not breathe paint mist, and avoid skin contact. If paint splashes on the skin, wash it immediately with suitable detergent, soap and water. , if it splashes into your eyes, rinse with water and treat with medication.
　　3. This instruction manual is the accumulation of our tests and experience and can be used as a construction guide. As the product improves, the relevant data may be changed. The latest instruction manual of our company shall prevail without prior notice.