Inorganic mineral paint

分类:

描述

        Interior wall paint
  Product introduction:
  Interior wall paint is basically composed of water, pigments, emulsions, fillers and various additives.
  Application areas:
  Suitable for interior wall decoration in various factories and buildings.
  Main features:
  It has the advantages of odorless, non-toxic, non-flammable, easy to construct, fast drying, good air permeability, strong adhesion, good water resistance, bright color, convenient construction, and bright decorative effect.
  Construction method:
  First, confirm that the substrate meets the painting requirements before painting;
  Second, it should be painted between 5 and 35°C, and the air humidity required for painting should be less than 85%;
  Third, choose the appropriate construction method and appropriate construction tools, and carry out construction operations according to recommended construction techniques;
  fourth, control the coating interval, and only after the recoating time is reached, can the next layer of painting be carried out. Recoating time that is too short will cause the base layer to dry slowly and cause wrinkles and other problems; the one-time application should not be too thick.
  Fifth, do not mix with organic solvents, acids, bases, oils and other chemicals.
  Sixth, air circulation should be maintained during construction, and the paint should be kept away from direct sunlight and heat sources.
  Seventh, to avoid contamination of skin and eyes or inhalation of excessive paint mist, please use protective equipment such as masks and gloves.
  8. If your eyes are contaminated, wash them immediately with plenty of water and seek medical treatment.
  9. Place it out of reach of children.
  Packaging and storage:
  Packaging and storage in accordance with national regulations. The storage environment should be dry, cool, well ventilated, avoid high temperatures, and keep away from fire sources. Packaging containers must be kept tightly closed. The effective storage period is 6 months.
  Note:
  When the indoor construction substrate temperature is lower than 5℃, it is not suitable for construction.
  Paint film performance:
  No. Inspection item standard requirements Inspection results Single conclusion
  1 Appearance of the paint film The appearance of the paint film is normal and qualified
  2 After stirring and mixing in the container, there are no hard lumps and the state is uniform and qualified
  3 Table drying time, h ≦2 2 Passed
  4 Drying time, h ≦ 24 24 Passed
  5 Adhesion ≦ 2 2 Passed
  Health and safety:
  Please pay attention to the warning signs on the packaging container. Use in a well-ventilated environment. Do not inhale paint mist and avoid skin contact. If paint is spilled on skin, wash away immediately with suitable detergent, soap and water. If it splashes into your eyes, rinse them thoroughly with water and seek medical treatment immediately.
  Disclaimer:
  The information provided in this product manual is entirely based on our knowledge gained in the laboratory and practice. However, since the use of products is usually beyond our control, we only guarantee the quality of the product itself. We reserve the right to modify this manual without prior notice.