Water-in-sand coating
描述
Product profile
Water coated sand coating is a product that combines the simulation of water coated water coating and the texture of real stone paint. Water coated sand coating is widely used in various products
High-end engineering, its decorative effect has greatly improved the quality of the project, the water-coated sand coating can be comparable to the real stone.
application area
Villa villa, hotel, hotel, entertainment places, commercial clubs, cement fiber board, column, plaster trim line, all kinds of partition board, ceiling and other building inside and exterior wall large area use.
L.F. capacitor
| order number | inspecting item | Standard requirements | result | Single conclusion |
| 1 | The appearance of the paint film | The coating was normal in appearance | accord with | qualified |
| 2 | Table shows the drying time, h | ≤2 | 2 | qualified |
| 3 | Work time, h | ≤24 | 24 | qualified |
| 4 | adhesion | ≥1 | 1 | qualified |
| 5 | Fully solidified, d | ≥7 | 7 | qualified |
Main features
A single spray can produce colorful lychee surface imitation marble effects with random particle sizes. This product is easy to construct, highly simulated, and costs only 30% of marble. It has good flexibility and strong ability to cover cracks. When matched with the primer, it has excellent bonding strength, water and alkali resistance, stain resistance and weather resistance.
Construction method
Before painting, various base surfaces should be treated to meet the corresponding painting conditions:
1. Concrete, cement dust removal, and external insulation plaster mortar surfaces: the surfaces must be clean and clean. The PH value should be maintained below 10, and the moisture content should be below 85%. Steel bars, iron sheets, etc. must be treated with anti-rust coating first.
2. Cement pressure board, calcium silicate board, fireproof board, GRC board, ALC board – if the base surface is uneven, it must be repaired with anti-cracking putty.
3. Wood: For wood treatment, oil-based primer is generally used to prime the surface, and then water-based paint is used to seal the oil-soluble substances. When processing composite panels, the joints are generally filled with elastic caulking and then adhered with gauze.
4. Generally, 2-3 coats of exterior wall flexible putty must be applied to the wall.
Packaging and storage
Pack and store in accordance with national regulations. The storage environment should be dry, cool, well ventilated, avoid high temperatures, and keep away from fire sources. Packaging containers must be kept tightly closed. The effective storage period is 6 months.
Precautions
When the temperature of outdoor construction substrate is lower than 5℃, it is not suitable for construction.
health and safety
Please pay attention to the warning labels on the packaging containers. Use in a well-ventilated environment. Do not inhale paint mist and avoid skin contact. If paint is spilled on skin, wash immediately with a suitable cleanser, soap and water. If it splashes into your eyes, rinse them thoroughly with water and seek medical treatment immediately.
statement
The information provided in this product data sheet is based solely on our knowledge gained in the laboratory and in practice. However, since the use of products is usually beyond our control, we only guarantee the quality of the product itself. We reserve the right to modify this manual without prior notice.
Style display
