Interior wall inorganic coating

描述

Product introduction
The inorganic binder used in MQNM-3 inorganic coating itself does not form a coating film on the surface of the organic substrate, but penetrates into the porous inorganic substrate, reacts chemically with limestone or putty containing a large amount of heavy calcium, and forms a substance similar to silicic acid. Calcium substances. It is not a polymer coating and will not degrade. So it is environmentally friendly paint.
Technical data
Appearance: white
PH value: 11-12
Viscosity: 65-68KU
Film appearance: normal
Amount of water added: 10-15
Drying time (surface dry): ≤2h
Constructability (roller coating): two-coat barrier-free
Scope of application
Characteristics of putty for supporting products such as homes, hospitals, schools, laboratories, subways, airports, tunnels, etc.:

This product has very good permeability. In order for the inorganic odor-free interior wall coating to exhibit the best effect, a matching special putty should be prepared. The putty has good scratching and polishing properties, and can work synergistically with inorganic coatings to create a stone surface effect.
This product has good compatibility with full-weight calcium putty powder. It has high surface hardness and is not easy to depowder. Alternatively, Meichao Yiguaping putty on the market has good compatibility after testing. It has high surface strength and is not easy to depowder. It is also most suitable for fully matured putty. The cement base material has good bonding properties, high strength and does not remove powder.
Construction technology
This product is suitable for roller coating, brush coating (spraying removes powder and is not easy to spray)
Precautions
Putty has the function of leveling the wall, but the wall after scraping needs to be sanded, so there will be a lot of dust on the surface. The strength of the inorganic paint requires a special penetration, which is strong but will not form a film or bite the bottom. of sealing primer. Normal lotions will form a film and bite the bottom. So only inorganic closed bottoms can achieve this purpose.
This sealing primer can be used not only to strengthen putty surfaces, but also to strengthen certain dry powder coatings and diatom mud. This product is colorless, odorless and does not form a film. When rolling the product, it is most suitable to use a medium-gross roller. The product has good leveling properties. Due to the strong permeability of the product, try to avoid pressing hard when rolling the coating, which will cause the coating film to come off.
Due to the strong permeability of the product, it is normal for the putty base material to lose powder after one application and drying. This phenomenon will not occur after the second application. store
Store sealed in a cool, dry place at 5-35°C.
health and safety
Please pay attention to the warning labels on the packaging containers. Use in a well-ventilated environment. Do not inhale paint mist and avoid skin contact. If paint is spilled on skin, wash immediately with a suitable cleanser, soap and water. If it splashes into your eyes, rinse them thoroughly with water and seek medical treatment immediately.
statement
The information provided in this product data sheet is based solely on our knowledge gained in the laboratory and in practice. However, since the use of products is usually beyond our control, we only guarantee the quality of the product itself. We reserve the right to modify this manual without prior notice.