alkyd enamel paint
Wholesale Shot Protective Coating For Metal Resina Epoxica Para Pisos Strong Adhesive Alkyd Industrial Anticorrosive Paint
描述
Physical parameters
| qualification | |
| test item | metric |
| Status in the container | After mixing, there is no hard block, showing a uniform state |
| Non-volatile substance content | 50 |
| Painting film appearance | normal |
| Construction | Barrier-free |
| Heavy coating adaptability | The heavy coating is barrier-free |
| Table dry time h | ≤8 |
| Work time h | ≤18 |
| fineness μm | ≤20 |
| lustre | ≥80 |
| Hardness | (double pendulum) | ≥0.2 |
| The skin was antipigmented for 48h | Unpigmented skin |
It is recommended to paint the number of lanes
2 lanes, with a dry film thickness greater than 60 μ m.
Front road matching with paint
In gray acid rust paint, iron red acid rust paint, red Dan acid rust paint.
surface preparation
The front paint shall be completely dry to remove all oil and debris on the paint film.
Construction conditions
The substrate temperature must be 3℃ above the dew point, and the relative humidity is not more than 85%.
Painting method
| airless spraying | air spraying | Rolling / brushing |
| Dilent Akyd diluent | Dilent Akyd diluent | Dilent Akyd diluent |
| Dilution of 0-5% (by paint weight) | Dilution 0-10% (by paint weight) | Dilution of 0-5% (by paint weight) |
| Nozzle diameter is 0.4-0.5mm | Nozzle diameter is 2.0-3.0mm | |
| The ejection pressure is 12-15 Mpa (about 120-150kg / cm ²) | Air pressure of 0.3-0.4Mpa (approximately 3-4kg / cm ²) |
safe guarding
The construction site should have good ventilation facilities, and the painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist. Fireworks are strictly prohibited at the construction site.
Transportation and storage
1, the product in the transportation, should prevent rain, sun exposure, avoid collision, and should comply with the relevant provisions of the traffic department.
2, the product should be stored in a cool and ventilated place to prevent direct sunlight, and isolate the fire source, away from the heat source in the warehouse.
