Alkyd blended paint

质量保证价格合理无机低锌底漆水性集装箱防锈漆

分类:

描述

Product introduction:
  Alkyd blended paint is processed from alkyd resin, pigments, extender pigments, driers and solvents. It has a good color and can be used as exterior paint.
  Physical parameters:

Technical indicators

Pilot projectsunitindex
Dry to the touchh≤4
Time to work hardh≤24
Finenessmm≤30
luster≥80
Hardness|(double pendulum)≥0.2
Volatile content≤50%
Anti-skinning48hNo crusting
ConstructabilityPaint accessibility
Adaptability to recoatingNo problem with repainting
Flash point≥30℃
ExteriorIn line with the sample, the paint film is smooth and within the color difference range.

  Performance characteristics:
  The paint film is plump, has good gloss and mechanical strength, and dries naturally at room temperature.
  The paint film is strong, has good adhesion and outdoor durability, and its performance is better than that of ordinary mixed paints, so it can be used as outdoor topcoat.
  Application areas:
  Suitable for indoor and outdoor general metal, wooden components and dry building surfaces for protection and decoration.
  Construction method:
  1. The paint must be stirred evenly before use. If coarse particles or crusts are found, filter them.
  2. Use alkyd diluent to adjust the construction viscosity.
  3. It can be applied by brushing or air spraying.
  4. The substrate should be cleaned and free of floating dust, oil, wax, etc. If the primer or substrate is too smooth, it must be polished evenly with fine sandpaper.
  5. If you apply it twice, you can sand it evenly with 120-grit sandpaper after the first coat is dry but before it dries or after it is completely dry before painting.
  6. The remaining paint should be covered with a small amount of thinner and sealed in time to prevent skinning.
  Safety protection:
  The construction site should have good ventilation facilities, and painters should wear glasses, gloves, masks, etc. to avoid skin contact and inhalation of paint mist. Fireworks are strictly prohibited at the construction site.
  Transportation and Storage:
  1. When transporting the product, it should be protected from rain, sunlight and collision, and should comply with the relevant regulations of the transportation department.
  2. The product should be stored in a cool and ventilated place, away from direct sunlight, insulated from fire sources, and in a warehouse away from heat sources.
  Paint film performance:

serial numberTest itemsstandard requirementtest resultSingle conclusion
1Appearance of paint filmThe appearance of the coating film is normalconform toqualified
2status in containerAfter stirring, there will be no lumps and a uniform state.conform toqualified
3Surface drying time, h ≦44qualified
4Actual drying time, h≦24twenty fourqualified
5Fineness mm ≦3030qualified
6Impact resistance ≥5550qualified

Packaging specifications:  20kg/barrel