Advanced exterior wall paint

描述

Product introduction
MQWM-2 high-grade exterior wall latex paint is a durable high-grade exterior wall latex paint. It is currently widely used in architectural coating systems with relatively high requirements. This series of products has high weather resistance, mildew and algae resistance, excellent decorative properties, is not easy to fade, and is easy to construct. At the same time, this coating system can also effectively improve the appearance of exterior walls. It has a good protective effect on the wall.
Features
100% pure acrylic emulsion, alkali resistant, good adhesion, easy construction, good hiding power, good weather resistance
It is applicable to various types of environments, including building coating engineering systems with relatively high requirements such as mildew and algae resistance in tropical environments.
use
It is widely used in exterior wall decoration of various materials such as high-end hotels, guesthouses, high-end residences, villas, resorts, office buildings, schools, hospitals, factories, grain warehouses, etc.
dilution
It should be stirred evenly before use.
In order to achieve the best painting effect, when rolling or brushing, you can use no more than 5% (volume ratio) of water to dilute it according to the actual situation (it can be increased or decreased according to the construction feel).
Recommended number of coating passes
Maggie’s special primer
MQWM-2 advanced exterior wall latex paint two coats

Drying time
(based on dry film 30μm, 25-30C)
Surface dry: 30min
Hard drying: 2h
Please do not construct in humid or cold weather (temperature below 5C, relative humidity above 85%).
Tool cleaning
Please use clean water to clean all equipment in time when painting is paused and after painting is completed.
Construction method
Roller coating, brush coating, airless spraying
Logistically measure the amount of paint consumed
9m²/kg (dry film 30 u mit)
Due to the different roughness and dilution ratio of the actual construction surface, the amount of paint consumed will also vary.
Recoat time
The interval should be at least 2 hours, but recoating should be done within a week at the most. If the topcoat has not been applied for more than 7 days, sand the primer to ensure good adhesion.
health and safety
Please pay attention to the warning labels on the packaging containers. Use in a well-ventilated environment. Do not inhale paint mist and avoid skin contact. If paint is spilled on skin, wash immediately with a suitable cleanser, soap and water. If it splashes into your eyes, rinse them thoroughly with water and seek medical treatment immediately.
statement
The information provided in this product data sheet is based solely on our knowledge gained in the laboratory and in practice. However, since the use of products is usually beyond our control, we only guarantee the quality of the product itself. We reserve the right to modify this manual without prior notice.