CHINESE STANDARD THERMOPLASTIC ROAD MARKING PAINT
- Brand Name:customized
- Main Raw Material:Glass beads, Pigment ,C5 resin, Caco3
- Application Method:Hot melt and Screed
- Color:White, Yellow
- Standards:JTT280-2004 Chinese Standard
- Glass bead content:18%~25%
- Feature:Highly reflective and Weather resistant
- Drying time:Within 3 minutes
- Shelf life:1 Year
- Package:25 Kg/ bag
- MOQ:1 ton
描述
Thermoplastic road marking paint is mainly used for more than 2 level road and highway.The thickness of lines made from this coating is (1.0 ~ 2.5) mm, paint mixed with reflective glass beads, and in the construction, spread the reflective glass beads on the surface. This type of marking line has good nightly reflective performance, long service life, generally up to 2 ~ 3 years.
Thermoplastic road marking paint needs special heater device in constructions. In second re-marking construction of old marking lines, you should eliminate the thick old marking line firstly.
Hot-melt reflective marking coating is mainly used for the highway and highway above grade 2, the marking coating thickness of this coating system is (1.0 ~ 2.5) mm, coating mixed with reflective glass beads, and in the marking construction, the surface sprinkled reflective glass beads. This kind of marking line has good night to glance performance, service life is longer, the demand that depends on the big highway construction of traffic flow estimates to coating of coating of all kinds of road marking line, small and the quality of coating itself and decide, can reach commonly (2 ~ 3) year. The construction of hot melt coating requires special heating equipment. To the old line of the second recoating, to eradicate the thicker the old coating can be applied.
Our main markets now include the Philippines, Vietnam, Malaysia, Japan, South Korea, the United Kingdom, the United States, Turkey, Laos, Cambodia, Thailand, Myanmar, Singapore, Indonesia, Brunei, Ethiopia and Venezuela. We are also actively developing the markets of other countries. Welcome to negotiate.
Parameters
| Raw Material | C5 Petroleum Resin, CaCO3, Glass Beads, DOP, PE, etc. |
| Gravity, g/m3 | 2.1 g/ml |
| Color | white, yellow, etc. |
| Heating Temperature | 180℃-220℃ |
| Softening Point, ℃ | 110℃ |
| Coating Appearance | No wrinkles, dots, blisters, cracks, fall-out & stick tyres |
| Drying Time, min | Within 3 minutes |
| Compressive Strength, MPa | 26 |
| Abrasive Resistance, mg | 42 |
| Water Resistance | Great(in water for 24 hours) |
| Alkali Resistance | Great(in saturated solution of calcium hydroxide for 24 hours) |
| Glass Beads, % | 18~25% |
| Fluidity, s | 40s |
| Coating Resisitance | Resist -10℃ for 4 hours |
| Heat Resistance | Under 0℃-2℃ for 4 hours |
Package & Use:
| Package | 25kg/bag, by plastic woven bag. One ‘ container can load Max. 25 tons. |
| Storage | dry, cool, avoid direct sunlight |
| Expiration date | 365 days |
| Theoretical spray rate | 4-5kg/㎡ |
Features
1. Cohesiveness
Specific formula, of good cohesiveness with road, pre-mark with our company’s dedicated primer (especially for concrete base) will strengthen the cohesiveness.
2. Anti-slipperiness
Our paint has anti-slipping material. On condition of good flowability, the anti-slipping material can ensure good anti-slipperiness and maximize the traffic safety.
3. Reflective effect
According to the settling rate of the glass beads, properly choose stable refractive and high quality coating type glass beads with different particle ratio. Mix them evenly inside the paint and dispense mixed type glass beads when executing will ensure new and old marking always to be in high reflection.
4. Dry fast
Use different formula to produce the paint according to temperature, humidity and roadbed condition when executing, ensure fast drying speed and antifouling property of the marking.
5. Stability
Choose excellent light and heat stability raw material ratio, add ultraviolet-proof additives at the same time, to make sure the long-acting color and luster even under strong sunshine.
6. Anti hair-cracking
Hair-cracking of the marking is a technical problem in road marking material industry home and abroad. After long-term research and by way of adding high temperature resistance lipid material and functional filler, our company completely solved the hair-cracking problem during executing.
