Inorganic zinc-rich primer
Inorganic zinc-rich primer is a two-component paint, which is composed of high grade inorganic zinc silicate resin, zinc powder, auxiliary agent, diluent and curing agent.
描述
Product selling point
Inorganic zinc-rich primer is a two-component paint, which is composed of high grade inorganic zinc silicate resin, zinc powder, auxiliary agent, diluent and curing agent.
Physical parameters
qualification | ||
test item | unit | metric |
The appearance of the paint film | The coating was normal in appearance | |
Status in the container | one | After stirring and mixing, there is no hard block, appearing in a uniform state |
lustre | dark | |
pigment | gray | |
Table dry | h | ≤0.5 |
get right on the job | h | ≤24 |
adhesion | level | 1 |
Thousand film thickness | μm | 50μm |
solid content | — | 56% |
product features
With excellent air-cutting and welding properties;
With steel has a strong adhesion, rust prevention performance;
Patent film with high hardness, good mechanical properties;
Excellent corrosion resistance;
Zinc potential (0.7624V) is lower than steel, the cathodic protection effect, the conductivity can eliminate static electricity;
Excellent solvent resistance, water resistance, oil, etc.;
construction technology
1, the substrate should first go to the oil, and then shot blasting, sandblasting treatment, and the substrate removed dry;
- The two groups should be mixed according to the prescribed proportion. When mixing, the zinc powder and pigment components should be slowly poured into the base agent group, and the two groups must be fully mixed evenly;
3, in the construction should be stirred at any time to prevent its precipitation, if there is patent skin or impurities, must be filtered out, the construction method is mainly air spraying;
- Before coating the next paint, the coating of inorganic zinc-rich primer must be completely solidified, otherwise the interlayer adhesion will be affected;
- After full mixing, it should be static and cooked for 30min before construction;
Packaging and storage
1, the storage environment should be dry, cool, well ventilated, avoid high temperature, away from the fire source.
- Packaging containers must be kept closed.
- The effective storage period is 12 months.
matters need attention
- After opening the lid, if it cannot be used up once, the lid should be sealed in time to prevent volatilization of the solvent.
Health and Safety
- Please note the warning signs on the packaging container.
- Use it in a well-ventilated environment.
- Do not inhale the paint mist and avoid skin contact.
- Wash the paint on the skin immediately with a suitable detergent, soap, and water.
- Splash into the eyes to flush with water, and seek immediate medical treatment.