Customized Color Thickness Water Based Waterproof Polyurethane Coating
描述
Product Description
Customized Color Thickness Water Based Waterproof Polyurethane Coating
High elasticity and high solid content polymer water-based waterproof coating is a new type of waterproof material to encourage the development of the country, because of its excellent performance, simple construction, easy to ensure the waterproof effect, long service life, has been widely used in all kinds of waterproof engineering.
The single component colour elastic waterproof coating with VAE and acrylic copolymer emulsion as the base material, through specific process modification is prepared, it has both high resilient organic material and inorganic material durability characteristics, the overall performance reached the domestic advanced level of similar products. It has been approved as the recommended product by the China Construction association.
Material Characteristics Customized Color Thickness Water Based Waterproof Polyurethane Coating
• The utility model has the advantages of water, single component, adjustable color, no poison, no peculiar smell, simple construction, and high environmental protection polymer waterproof material.
• After brushing the film, forming a high elongation, high tensile strength of the integrated seamless rubber and plastic layer, waterproof effect is good.
• Liquid construction at normal temperature without seams, especially for construction sites with complex shape and no fire.
• With high solid content, good physical and mechanical properties, good water resistance, good weather resistance and good durability, it can be exposed waterproof.
• For toilet, bath room, pool, wall waterproof and repair works best.
• Good aging resistance, stable performance in ultraviolet, heat, light and oxidation, long service life of materials.
Scope Of Application Customized Color Thickness Water Based Waterproof Polyurethane Coating
♥ Roof: a variety of new and old flat sloping roof and gutter cornices, especially for the irregular shape of the parts of waterproof.
♥ Ground construction: toilet, bathroom, kitchen, pool and exterior wall waterproof, moisture-proof finish.
♥ Underground construction: inside the wall, slab, underground tunnels, elevator etc..
♥ With a variety of waterproof coil or waterproof coating compound use, improve waterproof effect and durability.
♥ And SBS waterproof roll composite use, waterproof effect can reach more than 25 years.
TDS [executive standard JC/T864-2008] Customized Color Thickness Water Based Waterproof Polyurethane Coating
Item No. | Project | Technical index | ||
Type I | Type II | |||
1 | Tensile Strength Mpa ≥ | 1.0 | 1.5 | |
2 | Fracture Elongation % ≥ | 300 | ||
3 | Cryogenic Flexible Bending 10mm Around Rod 180° | -10℃,No crack | -20℃,No crack | |
4 | Water Tightness(0.3Mpa,30min) | Impermeable | ||
5 | Solid Content % ≥ | 65 | ||
6 | Drying Time,h | Table Dry ≤ | 4 | |
Hard Work ≤ | 8 | |||
7 | Tensile Strength Retention After Treatment % | Heating Treatment ≥ | 80 | |
Alkali Treatment ≥ | 60 | |||
Acid Treatment ≥ | 40 | |||
Weathering Treatment ≥ | — | 80-150 | ||
8 | Heating Expansion Ratio% | Elongation ≤ | 1.0 | |
Shorten ≤ | 1.0 |
Construction Method
In accordance with GB50207-94 “roof engineering technical specifications” in the 5.1 standard implementation:
→ Basic treatment: the base must be smooth solid, clean, no water, yin and yang angle should be made into a circular arc shape. The original old roof should be broken, the drum waterproof and dust cleaning house, low breakage, leak proof department should conduct plugging treatment, base should be smooth, do not have surface water. Water mouth, dividing joint and other special parts should be flexible sealing treatment, brushing procedure first general yang angle, then the vertical plane, then the construction of large area.
→ Bottom coating construction: mix the water and the coating according to the 1:3 weight proportion and stir evenly. The use of base paint can improve the permeability of coating to the base and strengthen the adhesive force.
→ Apply coating: the construction adopts the method of rolling, scraping and brushing. It is advisable to adopt the coating method with many layers. Each time the coating can not be too thick, it is generally divided into 3-4 brushing, with a total thickness of 1.5-2.0mm. After the coating is dried and film is formed, the coating can be painted again. Matrix reinforcement should be added to the weak links.
→ After each coating has been dried, the construction quality shall be checked. If leakage occurs and the drum rises, repair shall be made.
Customized Color Thickness Water Based Waterproof Polyurethane Coating